De-Installing a 2090 & 2105

To Deinstall a 2090 or 2105

1. Turn off and unplug the machine.


2. On the back left side of the main unit locate & detach the connector plug.


3. Return to the front of the machine.


4. Open the front of the finisher.


5. Locate the screw and metal pull tab about half way up the machine and on the right hand side of the inside of the finisher.


6. Unscrew the screw that links the metal pull tab to the finisher & save the screw.


7. Pull the metal pull tab towards yourself to release the finisher.


8. Push the finisher away from the copier and replace the screw to the original hole on the finisher.


9. Detach the wires at the bottom of the main unit. You may also need to unscrew the ground wire.

Removing the LCT

Large Capacity Tray

1. On the back right side of the main unit locate & detach the connector plug.


2. Return to the front of the machine.


3. Open the front of the LCT.


4. Locate the screw and metal pull tab at the top of the machine and on the left hand side of the inside of the LCT.


5. Unscrew the screw that links the metal pull tab to the finisher & save the screw.


6. Pull the metal pull tab towards yourself to release the LCT.


7. Push the LCT away from the copier and replace the screw to the original hole on the LCT.


8. Detach the wires at the bottom of the main unit. You may also need to unscrew the ground wire.

Removing Finisher Trays

1. Locate the screws below the bottom tray (one on each side) unscrew and lift up on the tray.


2. Replace screws to same holes on finisher.
   

These directions work for a Savin 4090, Lanier LD090, Gestetner 9002, Ricoh Aficio 2090, and IBM Infoprint 2090ES and a Gestetner 10512, IBM Infoprint2105ES, Toshiba e-Studio 1050, Lanier LD0105, Ricoh Aficio 2105, and Savin 40105.

Blogged with Flock

Canon CLC3900 Finisher

This is a picture of what I think the finisher will look like on this machine. The slot in the middle of the machine is where you will find the screw and the tab to release the finisher from connection to the copier.

1. Turn off and unplug the machine.


2. On the back left side of the main unit locate the finisher connector plug.


3. Press the top of the plug and pull away from the main unit.


4. Return to the front of the machine.


5. Locate the breakaway cover at the seam of the main unit and the finisher.


6. Pop the breakaway cover off the machine and set aside.


7. Locate the connecting screw that was just uncovered by the breakaway cover.


8. Use a Philips head screwdriver to unscrew the connecting screw and set the screw aside.


9. Locate and push the connecting leaver to the left. This should detach the finisher.

Blogged with Flock

Canon NP6030/NP6330

Dimensions: 25x24x22 inches
Weight: 180 pounds

Blogged with Flock