De-Installing a 2090 & 2105

To Deinstall a 2090 or 2105

1. Turn off and unplug the machine.


2. On the back left side of the main unit locate & detach the connector plug.


3. Return to the front of the machine.


4. Open the front of the finisher.


5. Locate the screw and metal pull tab about half way up the machine and on the right hand side of the inside of the finisher.


6. Unscrew the screw that links the metal pull tab to the finisher & save the screw.


7. Pull the metal pull tab towards yourself to release the finisher.


8. Push the finisher away from the copier and replace the screw to the original hole on the finisher.


9. Detach the wires at the bottom of the main unit. You may also need to unscrew the ground wire.

Removing the LCT

Large Capacity Tray

1. On the back right side of the main unit locate & detach the connector plug.


2. Return to the front of the machine.


3. Open the front of the LCT.


4. Locate the screw and metal pull tab at the top of the machine and on the left hand side of the inside of the LCT.


5. Unscrew the screw that links the metal pull tab to the finisher & save the screw.


6. Pull the metal pull tab towards yourself to release the LCT.


7. Push the LCT away from the copier and replace the screw to the original hole on the LCT.


8. Detach the wires at the bottom of the main unit. You may also need to unscrew the ground wire.

Removing Finisher Trays

1. Locate the screws below the bottom tray (one on each side) unscrew and lift up on the tray.


2. Replace screws to same holes on finisher.
   

These directions work for a Savin 4090, Lanier LD090, Gestetner 9002, Ricoh Aficio 2090, and IBM Infoprint 2090ES and a Gestetner 10512, IBM Infoprint2105ES, Toshiba e-Studio 1050, Lanier LD0105, Ricoh Aficio 2105, and Savin 40105.

Blogged with Flock