Deinstall the Arm of a Canon IR105

First, make sure the power is off, and all cables are unplugged. Read all directions thoroughly before beginning. Label all parts as they come off the machine with painter's tape.

1. Remove one screw behind the touch screen, next to the monitor connection. The monitor should come off.
2. Remove one screw from the bottom of the arm attached to the touch screen; remove metal panel.
3. Two screws have just been revealed to you. Unscrew them both, and the top cover should be easily removed.
4. Four more screws have been revealed at the elbow. Remove them.
5. Remove the two screws visible at base of gray trim and paper exit.
6. Remove the gray tray and panel covering the arm. You should be left with only a metal arm.
7. Now, you must remove the panel surrounding the power switch in order to reach some of the screws holding the arm to the machine.
8. Remove two screws on the top portion of the metal arm and two on the bottom side of the metal arm.

Your touch screen arm should now be successfully separated from your Canon imageRunner 105 or imageRunner 105+.

The shorturl for this post is http://mity.us/7w